How to search for printers in Kounta
Connect printers to your Kounta POS
1. Head on over to your POS on the Kounta App
2. From menu, select Printing
3. The system should immediately start searching for your printers - hang tight. If not, select Search for Printers Again
4. This will automatically add and connect the POS printers in the network. Once you see this dialog box, select Continue to Settings
5. Awesome, the printers are added! Select Test to see if the printer/s are working properly.
6. In the same page, you can assign which printer will print receipts, open the cash drawer, and print production dockets.
Related Articles
Lightspeed App Printing
Choosing a printer The Lightspeed App printing method allows your iPad or Android Tablet/ Mobile to communicate directly with compatible Epson or Star (iPad App only) ethernet printers. Epson TM-M30 Ethernet TM-T82II Ethernet TM-T82III Ethernet ...Register Information & Printing Settings
Register Information This is where you would need to go for basic settings on how your register works - such as name, status, and workflow. 1. Under Sites from the Kounta Back Office, select Devices 2. Select cog icon beside the name of the register ...Enable DHCP on Epson Printers - Windows and Mac
You may have hit a snag when setting up your printers and are seeing that your printer has DHCP disabled, and possibly an IP address of 192.168.192.168. This will cause some problems when trying to set up your printers, so this guide will walk you ...Setting up an Epson m30 Bluetooth Printer with Kounta
Before you begin Note - You’ll need to make sure that you have the Bluetooth version of the TM-M30 as there are some models of this printer that are not Bluetooth and they look nearly identical. You can confirm that your printer is ...Setting up Production Printing (aka Kitchen Printing)
Before you begin Naturally, before we set up production printing you will need to have set up your printers or set up your Bump Screen. Note: Bump Screens are the digitized version of kitchen printing. When you enable the Bump Screen addon it ...