How to Reconnect Abacus KDS to Master iPad
- On the Master iPad go to the dropdown menu and select settings
- Along the top go to Connection
- Write down the device address of the Master iPad thats displayed in the top left corner
- Go to KDS
- Press the gear button on the top right
- On the left hand side below Connected: No Authorised: No enter the device address of the Master
- Press Connect
- Notification should come up saying connected and it will automatically sync to the master
- Press the Gear button on the top right to return to the main screen
Order should start to come through now as the will have been successfully reconnected to the Master
Related Articles
Adjusting Wait Screen on KDS iPad
WAIT SCREEN KDS To find the Wait Screen settings in the KDS click on the gear toggle icon in the top right corner and you will see the below page. Scroll down looking on the right side of the screen and you'll see options that will effect the Wait ...
iPad Settings Audit
This guide will demonstrate an auditing process for iPads if there are any issues. Power Cycle the iPad Press the power button for a few seconds Swipe to power off Power on the iPad by pressing the power button, or disconnecting / reconnecting the ...
Abacus POS Opening Procedure
1. Opening the Register Log in to the Abacus POS system. Use the keypad to enter the amount of cash in the register (your float). Tap OPEN. Depending on your system setup: If Restaurant Mode is enabled, you'll be directed to the Table Map. If ...
Tyro Pro x Abacus POS
Understanding Tyro Pro model - the latest device from Tyro with full touchscreen. 1. Power button 2. Volume keys 3. USB type-C connector for power charging 4. Paper roll cover 5. Battery cover 6. Contactless sensor 7. High resolution touch screen 8. ...
Abacus Countertop Kiosk 21.5"